Configuring windows work group




















If they also want to share an Internet connection, then the wireless access point is plugged into a broadband Internet modem. A standard hybrid network uses a hybrid access point, a networking device that broadcasts a wireless signal and contains wired access ports. The most common hybrid access point is a hybrid router.

The typical hybrid router broadcasts a Wi-Fi signal using The hybrid router also has a port for connecting to a cable or DSL modem via an Ethernet cable. When shopping for a hybrid router, you might not see the word "hybrid" anywhere. After you determine which of your devices you want to connect with wires and which ones wirelessly, follow the procedures that are listed in Install a wired network , and Install a wireless network respectively to set up these parts of the hybrid network.

There are several different possible network configurations for a hybrid network. The most basic configuration has all the wired devices plugged into the Ethernet ports of the hybrid router, and the wireless devices connected to the router wirelessly.

Then the wireless devices can communicate with the wired devices via the hybrid router. If you want to network more than four wired devices, you can string several routers together, both wired and wireless, in a daisy chain formation.

You'll need enough wired routers to handle all of the wired devices the number of devices divided by four. And you'll need enough wireless routers in the right physical locations to broadcast a Wi-Fi signal to every corner of the network. In this way, you can connect both computers and peripherals such as printers and fax machines and place them where it will easy to access them.

When you need the maximum Internet and file-sharing speed for your work, you can plug into the network with an Ethernet cable. If you need to show a streaming video to your colleague in the office hallway, you can access the network wirelessly. With the right planning, your small business can save money on CAT 5 cables and routers by maximizing the reach of the wireless network. And with the right encryption and password management in place, the wireless portion of the network can be as secure as the wired.

After you set up your network, you might want to add more sharing options for your work and devices. Some of these options are set automatically, while others can be set manually. In Windows 8.

If certain sharing options don't turn on automatically, you can activate them manually. These manual activation options include:. Network discovery is a network setting that lets your device find other devices on the network and other devices find your device. Such functionality makes it easier to share files and printers. Network sharing automatically adjusts security and other settings based on the type of network connected to your device.

To check whether network sharing is enabled, follow the instructions. The first time you connect to a network, you'll be asked if you want to turn on sharing between devices and connect to network devices such as printers.

Your answer automatically sets the appropriate firewall and security settings for the type of network. You can turn sharing on or off at any time.

To share a file or folder, follow the instructions for the version of Windows installed on your device. With password-protected sharing, people on your network can't access shared folders on other devices, including Public folders, unless they have a user name and password on the device for shared folders.

The network map is a graphical view of the devices and devices on your network. The map shows how devices are connected and includes any problem areas.

It can be helpful for troubleshooting. For Windows 7, certain sharing options turn on automatically. For example, when you change your network location to Home or Work, network discovery is automatically turned on. Similarly, file sharing turns on automatically the first time you try to share a file or folder.

There are three network discovery states:. Windows 7 automatically adjusts security and other settings based on the type of network connected to your device. If you skip this step, then the first time that you connect to the network, you'll be asked to select your network location. You can change this setting later. The network offers some protection from the Internet such as a router and firewall and contains known or trusted devices. Network discovery is turned on automatically.

Most small business networks fall into this category. The network is available for public use. Examples of public networks are public Internet access networks, such as those found in airports, libraries, and coffee shops. This network location helps keep your device from being seen by other devices around you and helps protect your device from malicious software on the Internet. You should also select this option if you're connected directly to the Internet without using a router or if you have a mobile broadband connection.

The device is connected to a network that contains an Active Directory domain controller. A corporate network is one example of a domain network. This network location isn't available as an option. It must be set by the domain administrator. For your small business network, make sure that the network location type is set to Home or Work. Here's how to check:. For Windows Vista, certain sharing options turn on automatically.

For home or small office networks when you know and trust the people and devices on the network. Network discovery is on by default. For networks in public places such as coffee shops or airports. This location keeps your device from being visible to other devices around you and helps protect your device from any malicious software on the Internet.

Network discovery is turned off for this location. If your network consists of devices that are running similar hardware and software, you can select the option to download additional printer drivers on the host system.

We do not recommend this option if you have a mixed network that includes more than one combination of bit and bit operating systems. If your network contains devices running different versions of Windows, put all devices in the same workgroup.

This makes it possible for devices that are running different versions of Windows to detect and access one another. Remember that the default workgroup name is not the same in all versions of Windows. If Windows XP devices still don't appear on the network map even after you install the LLTD protocol, check your Windows firewall settings and make sure that file and printer sharing is enabled. If you're using another firewall, see the information that was included with your firewall.

A Workgroup can share files, network storage, printers and any connected resource. It can be for anything you like. As mentioned, Windows 10 automatically sets up a default Workgroup when it installs so this step is already taken care of for you. Find Workgroup and select Change settings. Type in the name of the Workgroup you want to join and click OK.

Organizations need to authenticate and verify the identity of each user before they gain access to these resources—but how? The method you use to authenticate and verify users depends on the type of computer network setup in your work environment.

There are two major types of network setups:. Here we will look at what a workgroup is, how to set one up, and how authentication is managed in a workgroup. According to Techopedia, a workgroup is a peer-to-peer network setup using Microsoft Windows operating system. You can easily create a workgroup by connecting two or more PCs without going through a separate server computer.

In a workgroup, each computer on the network is physically connected to a router or switch. You can connect a computer to your network without making it a member of a specific workgroup. You can even have multiple workgroups in the same network. Every computer on this network will have its own database of usernames and passwords. Every PC in a workgroup is a server and a client at the same time.

A PC will act as a client when it seeks to access a resource in another PC. The PC which needs to provide the access to its resources will act as a server during the process of authentication and authorization. To do this, you need a centralized database that manages all usernames and passwords, called Active Directory.

Note: A client PC cannot belong to a workgroup and a domain at the same time. If a client joins a domain, its workgroup membership will be automatically removed. The reverse is also true. Workgroups are great for small office networks with 15 or less computers. Simply put, AD workgroups are fine for small offices, but they are not efficient in scaling to big organizations.



0コメント

  • 1000 / 1000